Cover

Without any doubt, this is our star model. This patented design is the one that has covered most conveyors in the world. Its versatility and strength have turned this model into an industry standard throughout the world of belt conveyors.

 

Characteristics

Completely closed: the cover covers 180º, up to the conveyor belt frame.
Folds on both sides: our patented C-1 closing-hinge system enables quick conveyor belt access from both sides, without having to completely dismantle the cover. Only two nuts have to be loosened.
Dismountable: it can be completely dismantled by loosening four screws, leaving the conveyor belt completely free. Without any structures or obstacles.
Self-supporting: it does not require any structure.
Quick and simple to install: it adapts to practically all conveyor belts.

Installation instructions

No pre-installation: never install all the steel angles (or billets) at the same time and then all the fixings. Because of tolerances they may not coincide. Steel angles (or billets) and fixings have to be installed successively, all at the same time. There are other models suitable for pre-installation in workshops. Do not doubt in contacting us.
Stop the conveyor belt before beginning to install the fixings.
Install the fixings alternatively up and dow. Not all superposed in the way of roof tiles. Necessary tools: Electric screwdriver with 8-mm chuck (for steel angles) or welding gear (for billet), two 10-mm and one 11-mm spanners.
Use PPE (personal protection equipment) as required by law. CAPOTEX recommends the use of gloves, hardhat, safety boots, ear protection and welding facemask (only for the billet-welding option).

Recomended Fixings

C1