Berlín | Capotex

Pure state accessibility. These two models offer visual and manual accessibility from both sides of the belt without having to dismantle anything whatsoever. It protects the belt from wind and rain while leaving sufficient space to raise the conveyor belt and replace the rollers. Everything is an advantage.

Inspections accesses on both sides: the cover only covers the upper part of the belt, leaving both sides free for maintenance.

Dismountable: it is completely dismountable by loosening the screws, leaving the conveyor belt completely free.

Self-supporting: it does not require any structure.

Quick simple installation: it adapts to practically all conveyor belts.

Directly screw the cover to the conveyor belt frame. It is recommended that 40 x 40-mm steel angles be installed on both sides of the conveyor belt.

Pre-installation option: the steel angle can be welded in the workshop, with subsequent onsite installation of the fixings.
Stop the conveyor belt before beginning to install the fixings.

Install the fixings alternatively up and dow: Not all superposed in the way of roof tiles.

Necessary tools: Electric screwdriver with 8-mm chuck.

Use PPE (personal protection equipment) as required by law. CAPOTEX recommends the use of gloves, hardhat, safety boots and ear protection.

MODEL COVER FIXING
BERLIN CLASSIC TEKS 5.5
CLAMP C-6
HOOK C-9
STRAP C-7 1 or 2 hooks with or without platen

SEND US YOUR REVIEW

Write your comment or opinion about our company to improve. Your opinion matters to us.

CONTACT US

If you have any questions or queries write us and we will respond as soon as possible. We speak English, Spanish, German, French and Italian.